首页 生活 技术分享

# 开启 telent

注意：54XXXXXXXXC8 为光猫背后 ONU MAC：54-XX-XX-XX-XX-C8

  1. 打开 http://192.168.X.X:8080 (网关地址) 使用密码登陆
  2. 执行 http://192.168.X.X:8080/cgi-bin/telnetenable.cgi?key=54XXXXXXXXC8&telnetenable=1
  3. 用 telent 命令登陆
    用户名：telecom 密码：nE7jA%5m
  4. 获取 telnet 用户名密码
获取telnet的用户名
cfg_cmd get InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.TelnetUserName
获取telnet的密码
cfg_cmd get InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.TelnetPassword
  1. 转为 root 用户
su
密码：Fh@XXXXXX(X为mac地址的后6位)
  1. 获取 web 超级密码
cfg_cmd get InternetGatewayDevice.DeviceInfo.X_CT-COM_TeleComAccount.Password | grep 'get success' | cut -d = -f 2

7、访问 http://192.168.1.1:8080/html/logoffaccount.html 把隐藏用户打开，其它选项改为可修改

两种命令模式：

# 工厂模式

  1. 进入工厂模式
load_cli factory
  1. 显示管理员密码
show admin_pwd
  1. 显示所有命令
?
  1. 显示所有 show 命令
show ?
  1. 显示所有 set 命令
set ?
  1. 显示所有信息
show allinfo

# cfg_cmd 命令模式

  1. 开启 TELNET
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.TelnetEnable 1
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.TelnetUserName 用户名
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.TelnetPassword 密码
  1. 打开 FTP 功能
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.FtpEnable 1
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.FtpUserName 用户名
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_ServiceManage.FtpPassword 密码
  1. 获取 LOID
cfg_cmd get InternetGatewayDevice.X_CT-COM_UserInfo.UserName |grep 'value' |cut -d '=' -f 2
  1. TR069
cfg_cmd get InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.Enable
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.Enable 0 #0 禁用，1 启用
cfg_cmd get InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.VLANIDMark
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.VLANIDMark 99 #默认 46
cfg_cmd get InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.Mode
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.Mode 2 #默认 2
cfg_cmd get InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_AccessControl.Enabled
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_AccessControl.Enabled 0 #0 禁用，1 启用
cfg_cmd get InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.Enable
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.Enable 0 #0 禁用，1 启用
  1. 关闭 TR069 中间件
cfg_cmd set InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.Tr069Enable 0
  1. 删除 1_TR069_R_VID_46
cfg_cmd set InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.X_CT-COM_WANEponLinkConfig.IP_Routed=''
  1. 查看设备目前的连接数
cfg_cmd get InternetGatewayDevice.Services.X_CT-COM_MWBAND.TotalTerminalNumber
  1. 设置设备连接数
cfg_cmd set InternetGatewayDevice.Services.X_CT-COM_MWBAND.TotalTerminalNumber 255
  1. 用户信息
cfg_cmd get InternetGatewayDevice.X_CT-COM_UserInfo.UserName
  1. 获取 cfg_cmd 帮助
cfg_cmd help
  1. 获取指定节点后的节点
cfg_cmd shownode InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1. [0|1] 
（如cfg_cmd shownode InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1. [0]）